Supports up to 2 Intel® Xeon® 3.06 GHz or
2.8 GHz processors
At A Glance
Two USB ports
ROM Based Setup Utility (RBSU) and PXE support
ServerWorks GC-SL Chipset with 533-MHz Front Side
Bus
512-KB second level ECC cache standard (full speed)
256-MB PC2100 ECC DDR SDRAM Memory, expandable to
4 GB
Four total I/O slots; three available in SCSI models
64-Bit/33MHz, 3.3v PCI
NC7760 PCI Gigabit Server Adapter (embedded)
Integrated Dual Channel Ultra ATA/100 Adapter with
Integrated ATA RAID 0, 1, & 1+0 (ATA Models) or Integrated Single
Channel Wide Ultra3 SCSI Adapter in a PCI slot (SCSI Models)
Support for up to five 1" Ultra320 non-hot-plug
SCSI hard drives or four 1" ATA non-hot-plug drives (model dependent)
SCSI Models (with optional drive cage): Internal
storage capacity of up to 1.040 TB (3 x 146.8 GB non-hot-plug + 2 x
300 GB hot plug 1" hard drives)
ATA Models: Internal storage capacity of up to 640
GB (4 x 160-GB ATA/100 drives)
Integrated ATI Rage XL with 8MB SDRAM video
300W Power Supply
Systems Insight Manager, SmartStart and Automatic
Server Recovery-2 (ASR-2)
Protected by HP Services, including a one-year,
limited warranty, Next Business Day 1 year on-site limited Global warranty
and Pre-Failure Warranty, which covers processors, memory, and hard
drives - Certain restrictions and exclusions apply.
Integrated ATI RAGE XL Video
Controller with 8MB SDRAM Video Memory
Form Factor
Tower (5U) Tower to Rack Enabling
Option Kit available (PN 238547-B22)
ProLiant
Essentials Foundation Pack Software
HP Systems Insight Manager
HP Systems Insight Manager
(HP SIM) helps maximize system uptime and performance and reduce system
maintenance costs by providing proactive notification of problems
before those problems result in unplanned downtime or reduced productivity.
For more information on HP SIM, visit http://www.hp.com/go/hpsim.
SmartStart
SmartStart simplifies
server setup by providing a rapid way to deploy reliable and consistent
server configurations. For more information, please visit the SmartStart
Web site at http://www.hp.com/servers/smartstart.
Minimum SmartStart version supported: SmartStart 6.4.
Latest SmartStart version supported: SmartStart 7.2
Management Agents
The Management Agents
provide direct, browser-based access to in-depth instrumentation built
into HP servers, workstations, desktops, or portables, and send alerts
to Systems Insight Manager or other enterprise management applications
in case of subsystem or environmental failures. For additional information
about the Management Agents and other management products from HP,
visit http://www.hp.com/servers/manage.
Subscriber's Choice
Subscriber's Choice Driver
and Support Alerts/Notifications is a web-based email subscription
service that provides automatic delivery of software and driver change
notifications for ProLiant products. Sign up at http://www.hp.com/go/subscriberschoice
and customize your profile to receive alerts on updates as they become
available.
ROMPaq,
support software, and
configuration utilities
The latest software, drivers,
and firmware fully optimized and tested for your ProLiant server and
options
Available in SmartStart or downloadable from the Software and Drivers
download pages at http://www.hp.com/go/support.
Survey Utility and diagnostics
utilities
The most advanced configuration
analysis, reporting and troubleshooting utilities used by HP at your
fingertips
Available in SmartStart.
Optional
ProLiant Essentials Value Packs
Optional software offerings
that selectively extend the functionality of an Adaptive Infrastructure
to address specific business problems and needs:
Rapid Deployment Pack – an automated solution for multi-server
deployment and provisioning, enabling companies to quickly and
easily adapt to changing business demands.
Workload Management Pack – provides easier management of
complex environments, improving overall server utilization and
enabling Windows® 2000 customers for the first time to confidently
deploy multiple applications on a single multiprocessor ProLiant
Server.
Performance Management Pack – a performance management
solution that identifies and explains hardware performance bottlenecks
on ProLiant servers and attached options enabling users to better
utilize their valuable resources.
Intelligent Networking Pack - detects and analyzes network bottlenecks
or broken network linkages and steers traffic to the optimum route
based on network conditions.
Vulnerability and Patch Management Pack - identifies and remediates
software security vulnerabilities due to missing patches as well
operating system configurations that can be exploited by viruses,
worms, and other blended threats
Virtual Machine Management Pack - provides central management
and control of virtual machines from Microsoft and VMware. Integrated
approach provides the ability to manage both physical and virtual
resources from a single management console.
NOTE: Flexible
and volume quantity license kits are available for ProLiant Essentials Value
Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information. NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: http://www.hp.com/servers/proliantessentials
Industry Standard Compliance
ACPI V1.0b Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
Intelligent
Manageability
HP Systems Insight Manager
Redundant ROM
Remote Flash ROM
Automatic Server Recovery-2 (ASR-2)
Remote Insight Lights-Out Edition II (optional)
Drive Parameter Tracking (with Smart Array Controller)
Dynamic Sector Repairing (with Smart Array Controller)
Pre-Failure Warranty (covers processors, memory and hard drives)
Security
Power-on password
Setup password
Diskette boot control
Power switch security
Server Power Cords
One Lowline power cord ships
standard
Power Supply
300 Watts, PFC (Power Factor
Correcting)
System
Fans
1 system fan ships standard.
1 system fan total supported (does not include fans integral to CPU heatsink
or power supply assemblies).
Microsoft Windows 2000 (Server
and Advanced Server)
Microsoft Small Business Server 2000
Microsoft Small Business Server 2003
Windows Server 2003
Novell NetWare
Novell NetWare Small Business Server 6.0
Linux (Red Hat, SuSE, UnitedLinux)
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 Series
Racks provide enhanced airflow for maximum cooling, allowing these racks
to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack
is used, observe the following additional requirements to ensure adequate
airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U
server rack includes closing front and rear doors, you must allow
830 square inches (5,350 sq cm) of hole evenly distributed from top
to bottom to permit adequate airflow (equivalent to the required 64
percent open area for ventilation).
Side: The clearance between the
installed rack component and the side panels of the rack must be a
minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels
to fill all remaining empty front panel U-spaces in the rack. This arrangement
ensures proper airflow. Using a rack without blanking panels results in
improper cooling that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide
or the Documentation CD provided with the server, or to the server documentation
located in the Support section at the following URL: http://h18000.www1.hp.com/products/servers/ProLiantml330/index.html.
Factory Express Portfolio for
Servers and Storage
HP Factory Express offers configuration,
customization, integration and deployment services for HP servers and storage
products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA3000
& EVA5000, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to http://www.hp.com/go/factory-express
Service and Support
One-year limited warranty, including
hardware diagnostic support, and pre-failure warranty (coverage of hard
drives, memory and processors). The warranty is fully supported by HP Services
and a worldwide network of resellers and service providers. An additional
90-day getting started software telephone support may be covered under the
warranty or available for an additional fee. Enhancements to warranty services
are available through HP Care Pack services.
NOTE: Limited warranty includes 1
year parts, 1 year labor, 1-year on-site support.
Care Pack services provide a range of life cycle support options that
let you choose the service levels that meet your business requirements,
from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available
including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13
hours, 5 day to 24 hours, 7 days call window with options including
4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support for Microsoft,
Linux, ProLiant Essentials and VMWare-based IT solutions helping to
deliver high level of application availability. Response times range
from 30 mins for critical problems to 2 hours.
System Management, Performance Services and Mission Critical Support
Solution
HP Care Pack services include coverage for the HP branded hardware options
qualified for the server, purchased at the same time or afterward, internal
to the enclosure, as well as 22" and smaller external monitors and
tower UPS options up to 3kVA; these items will be covered at the same
service level and for the same coverage period as the server. Coverage
of UPS Battery is not included, standard warranty terms & conditions
apply. For servers or storage systems installed within a rack, service
also covers all HP qualified rack options installed within the same rack.
NOTE: For more
information on HP Care Pack services, contact any of our worldwide sales
offices or resellers or visit our worldwide Web site on the internet at:
http://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers
and resellers, please visit us at:http://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty and
technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
Performance Management
Pack, single server NOTE: This license allows 1 server
to be managed by Performance Management Pack.
306696-B21
Performance Management
Pack, 10 Pack Server License
374055-B21
ProLiant Essentials
Performance Management Pack Flexible License NOTE: A single pack is shipped with
a single license key for the total number of licenses ordered
NOTE:
Flexible and volume quantity license kits are available for ProLiant
Essentials Value Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for
more information. NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: http://www.hp.com/servers/proliantessentials.
Software
HP digital asset protection
302316-001
Processors
Intel Xeon 3.06 GHz-512KB
Processor Option Kit NOTE: The Intel Xeon 3.06 GHz-512KB
Processor Option Kit is supported by the ProLiant ML330 G3 servers only.
354606-B21
Intel Xeon 2.80 GHz-512KB
Processor Option Kit NOTE: The Intel Xeon 2.80 GHz-512KB
Processor Option Kit is supported by the ProLiant ML330 G3 servers only.
317823-B21
Intel Xeon 2.40 GHz-512KB
Processor Option Kit NOTE: The Intel Xeon 2.40 GHz-512KB
Processor Option Kit is supported by the ProLiant ML330 G3 servers only.
323139-B21
ML330 G3 Memory (DIMMs)
128MB of Advanced ECC PC2100 DDR
SDRAM DIMM Memory Kit (1 x 128 MB)
CD-RW/DVD ROM Combo Drive Option
Kit NOTE: The DVD-ROM drive is supported
in the CD-ROM bay and in the removable media bay. If placed in the removable
media bay, it requires the 2-Device IDE cable (PN 305381-B21).
ML3xx Two Bay Hot Plug SCSI Drive
Cage NOTE: The drive cage option kit (PN
244059-B21) has one 1" drive bay and one 1.6" drive bay. It installs
in two removable media bays.
NOTE: All U320
Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives
require an optional U320 Smart Array Controller or U320 SCSI HBA to support
U320 transfer rates.
256-MB Battery-Back Cache Module NOTE: This 256-MB Battery-Backed
Cache Module supports the Smart Array 5300 series controllers, HP StorageWorks
Modular Smart Array 1000 and the HP StorageWorks Modular Smart Array 500.
NOTE: In
order to install certain tape drives internally, you may need to remove
the rails that come standard on the drives and then re-insert the
screws in the mounting holes. Mounting screws are shipped standard
with server.
NOTE: To
run external SCSI-based devices, either an Internal-to-External SCSI
Cable Option kit (for SCSI models) or a SCSI controller with external
channel (for ATA models) must be purchased.
Review the server cabling matrix for additional information on cables
required to connect backup products to the server.
Ultrium Tape Drives -
External, Rack-Mount and Array
HP StorageWorks Ultrium
215 Tape Drive, External (Carbon)
HP StorageWorks 1U Rack-Mount
Kit NOTE: The 1U Rack-mount Kit
can support up to 2 half-height tape drives and compatible with multiple
Single-Ended and LVD SCSI tape drives including DAT 24, DAT40, DAT72,
DLT VS 80, and Ultrium 215 tape drives.
HP StorageWorks 3U Rack-Mount
Kit NOTE: The 3U Rack-Mount Kit
can support up to 2 full-height or 4 half-height tape drives and compatible
with multiple Single-Ended and LVD SCSI tape drives including DAT,
DLT VS80, SDLT 320, Ultrium 215, Ultrium 230, and Ultrium 460 Tape
Drives.
HP StorageWorks 5U Rack-Mount
Kit NOTE: The 5U Rack-Mount Kit
can support up to 4 full-height tape drives and is compatible with
SDLT 320, Ultrium 230, and Ultrium 460 tape drives.
NOTE:
The Tape Array 5300 is a 3U enclosure that supports up to 2 full-height
or 4 half-height hot-swap array modules, including DAT and Ultrium
tape drives. Cables and terminators are not included and must be ordered
separately. NOTE: Please see the Tape Array 5300 QuickSpecs for additional
information regarding this product. http://h18000.www1.hp.com/products/quickspecs/11878_na/11878_na.html
Accessories for 3U &
5U Rack-mount Tape Drive Kits
LVD Cable Kit, VHDCI/HD68 NOTE: For use with the 3U Rack-mount
Kit and 5U Rack-mount Kit only.
NOTE: Required
to install the 1/8 tape autoloader in a standard 19-inch rack
NOTE: Please reference
the 1/8 Tape Autoloader QuickSpecs at http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at http://www.hp.com/go/ebs
MSL6060, 2 drive, 60 slot Ultrium
460, with embedded FC router
AD604A
NOTE: Please reference
the MSL6000 Tape Library QuickSpecs at http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at http://www.hp.com/go/ebs
NOTE: Please reference
the MSL5026S2 Tape Library QuickSpecs at http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at http:/www.hp.com/go/ebs
NOTE:Please reference the MSL5052S2
Tape Library QuickSpecs at http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at http:/www.hp.com/go/ebs
NOTE:Please reference the MSL5030
Tape Library QuickSpecs at http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at http:/www.hp.com/go/ebs
NOTE:Please reference the MSL5060
Tape Library QuickSpecs at http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at http:/www.hp.com/go/ebs
NOTE: Please reference
the ESL E-Series Tape Libraries QuickSpecs at http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at http://www.hp.com/go/ebs
Magneto-Optical Jukeboxes
HP StorageWorks 9.1 GB Entry-level
Optical Storage
9100mx standalone drive
C1114M
220mx, 1 drive, 24 slot jukebox
C1118M
220mx, 2 drive, 24 slot jukebox
C1119M
NOTE: Please reference the
Magneto-Optical Jukebox data sheets at http://www.hp.com/go/optical
for additional information needed to create a complete solution
Ultra Density Optical Jukeboxes
HP StorageWorks Ultra Density Optical Storage
30ux standalone drive
AA961A
700ux, 1 drive, 24 slot jukebox
AA962A
700ux, 2 drive, 24 slot jukebox
AA963A
1100ux, 2 drive, 38 slot jukebox
AA964A
NOTE: Please reference the
Magneto-Optical Jukebox data sheets at http://www.hp.com/go/optical
for additional information needed to create a complete solution
HP StorageWorks Modular Smart Array 500
HP StorageWorks Modular Smart Array 500 Generation 2
335880-B21
Modular Smart Array 500 High Availability
Kit NOTE: includes Modular Smart Array
500 controller, 4-port IO Module, Smart Array Multipath Software and 2 SA-532
Adapters.
NOTE: To run any
external SCSI-based devices, the customer needs to purchase an Internal
to External Cable Option kit for SCSI models or a SCSI controller for ATA
Models.
HP StorageWorks Modular Smart
Array 30 SB NOTE: Rack-mountable 14 drive enclosure
with single bus, redundant power supplies
302969-B21
HP StorageWorks Modular Smart
Array 30 DB NOTE: Rack-mountable 14 drive enclosure
with dual bus, redundant power supplies
302970-B21
NOTE:
The Modular Smart Array Enclosure 30 Family supports the Wide Ultra3, Ultra320
1" Hot Plug Hard Drives.
StorageWorks Enclosure 4200 Redundant
Power Supply Option
NOTE: 1U/0U mounting brackets shipped
with the unit (optimized for 10000
and 9000 series racks).
HP Modular Power Distribution
Units (mPDU), Low Volt Model, 24A (100-127 VAC) NOTE: The above mPDU may also be
used to connect to the low volt model of the UPS R3000 XR.
NOTE: The DL360
Telco Rack Option Kit (251243-B21) interfaces with the ProLiant ML310/ML330
Rack Enabling Kit (PN 238547-B22) to support installation in a telco rack.
Other
ProLiant ML310/ML330 G2 SCSI Cable
Kit NOTE: This SCSI Cable Kit (PN 273463-B21)
is required when installing an internal tape drive and a SCSI Controller.
273463-B21
ProLiant ML3xx Internal to External
SCSI Cable Option Kit (HD68)
159547-B22
ProLiant ML3xx Internal to External
SCSI Cable Option Kit (VHDCI)
NOTE: -B21 (pallet) used to ship empty
racks shipped on a truck
-B22 (shock pallet) used to ship racks with equipment installed (by custom
systems, VARs and Channels)
-B23 (crated) used for air shipments of empty racks
NOTE: It is mandatory to use a shock
pallet in order to ship racks with equipment installed. Not all HP equipment
is qualified to be shipped in the Rack 10000 series
Service and Support Offerings (HP
Care Pack Services)
Hardware Services
On-site Service
Next Business Day On-site
Service, 5-Day x 9-Hour Coverage, 3 Years
U4462A
Next Business Day On-site
Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic
U4462E
4-Hour On-site Service,
5-Day x 13-Hour Coverage, 3 Years
U4463A
4-Hour On-site Service,
5-Day x 13-Hour Coverage, 3 Years, Electronic
U4463E
4-Hour On-site Service,
7-Day x 24-Hour Coverage, 3 Years
U4464A
4-Hour On-site Service,
7-Day x 24-Hour Coverage, 3 Years, Electronic
U4464E
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years
U4465A
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
U4465E
Installation &
Start-up Services
Hardware Installation
U4473A
Hardware Installation, Electronic
U4473E
Installation & Start-Up
of a ProLiant server and Microsoft or Linux O/S per the Customer Description
and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F,
excl. HP holidays.
U4474A
Installation & Start-Up
of a ProLiant server and Microsoft or Linux O/S per the Customer Description
and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F,
excl. HP holidays, Electronic
U4474E
Support Plus
Onsite HW support, 8am-9pm,
M-F, 4hr response and Microsoft O/S SW Tech support offsite, onsite
at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays.
U4475A
Onsite HW support, 8am-9pm,
M-F, 4hr response and Microsoft O/S SW Tech support offsite, onsite
at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays,
Electronic
U4475E
Onsite HW support, 8am-9pm,
M-F, 4hr response and Linux O/S SW Tech support offsite, onsite at
HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays.
U4477A
Onsite HW support, 8am-9pm,
M-F, 4hr response and Linux O/S SW Tech support offsite, onsite at
HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays,
Electcronic
U4477E
Support Plus 24
Onsite HW support 24x7,
4hr response and Microsoft O/S SW Tech support offsite, onsite at
HP's discretion, 24x7 2hr response time incl. HP holidays.
U4476A
Onsite HW support 24x7,
4hr response and Microsoft O/S SW Tech support offsite, onsite at
HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic
U4476E
Onsite HW support 24x7,
4hr response and Linux O/S SW Tech support offsite, onsite at HP's
discretion, 24x7 2hr response time incl. HP holidays.
U4478A
Onsite HW support 24x7,
4hr response and Linux O/S SW Tech support offsite, onsite at HP's
discretion, 24x7 2hr response time incl. HP holidays, Electronic
Standard Memory
256-MB (expandable to 4GB) of non-interleaved PC2100 DDR SDRAM running
at 266MHz, with Advanced ECC capabilities (1 x 256MB)
Standard Memory Plus Optional Memory
Up to 3328-MB memory is available with the optional installation of PC2100
DDR SDRAM memory kits.
Standard Memory Replaced with
Optional Memory
Up to 4096-MB memory is available with the removal of the standard 256-MB
of memory and the optional installation of PC2100 DDR SDRAM DIMM memory
kits.
NOTE: Charts do not represent all
possible memory configurations.
ML330 G3 Memory
Slot
1
2
3
4
Standard
256 MB
256 MB
Empty
Empty
Empty
Optional
3,328 MB
256 MB
1024 MB
1024 MB
1024 MB
Maximum
4,096 MB
1024 MB
1024 MB
1024 MB
1024 MB
Following are memory options available from HP:
128MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 128 MB)
NOTE: All U320
Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives
require an optional U320 Smart Array Controller or U320 SCSI HBA to support
U320 transfer rates.
Hard
Drives (ATA Models only)
ATA/100 - Non-Hot Plug
1-inch
160.0-GB
80.0-GB
40.0-GB
Up to 4
0, 1, A, B, C, D
(Using the A position requires the removal or re-positioning of CD-ROM)
Integrated Dual Channel Ultra
ATA-100 Adapter with support for Integrated ATA RAID 0, 1, & 1+0 (ATA
Models)
HP StorageWorks Tape Drives,
Internal, Hot Plug
DAT 72 Tape Drive
DAT 40 Tape Drive
(NOTE: For use with the ML3xx Two Bay Hot Plug SCSI Drive Cage (PN
244059-B21) ONLY.)
Up to 2
(With optional ML3xx Two Bay Hot Plug SCSI Drive Cage)
System
Leakage with all power supplies loaded (mA)
0.70
0.81
1.47
1.55
1.62
1.69
System Inrush Current with
all power supplies loaded (A)
42
48
87
92
96
100
Power
cord requirements
Nema 5-15P
to IEC320-C13
Option no./Spare
no: 227099-001/187335-001
IEC320-C13
to IEC320-C14
Option no./Spare
no: 142257-001/142258-B21
Example of real input watts consumed versus rated watts consumed is available
via the online tool located at url: http://inline.compaq.com/pg/ecg/issd/power/psupply.asp
select system calculator for one of the systems and reference the green fields
at the bottom of the calculator.
To drill down to calculators: - Click on: "ProLiant
Servers" - Click on the Server of interest. Example: ML330
G3 - Click on: "Power Calculator" link (You may need
to scroll down to see it.)
Server Power Cords One 12 Ft.
lowline power cord ships standard.
NOTE: Support
for either one internal, or one external is available. Internal cabling
is included with the server. External SCSI cabling from the integrated SCSI
controller is achieved using an internal to external SCSI cable option kit
(PN 159547-B22 or 333370-B21).
Power Supply Output
Power
(per power supply)
Rated Steady-State Power
300W
Maximum Peak Power
400W
Temperature Range
Operating
50° to 93° F (10°
to 35° C)
Shipping
-40° to 150° F (-40°
to 66° C)
Relative Humidity (non-condensing)
Operating
20% to 80%
Non-operating
5% to 90%
Acoustic Noise
Idle
(Fixed Disk Drives Spinning)
L WAd (BELS)
5.1
L pAm (dBA)
34
Operating
(Random Seeks to Fixed Disks)
L WAd (BELS)
5.5
L pAm (dBA)
38
48X Max IDE
CD-ROM Drive
Disk
Applicable Disk
CD-ROM (modes 1 and 2); mixed mode
(audio and data combined)
CD-DA
Photo CD (Single- and Multi-session)
CD-XA (mode 2, forms 1 and 2)
CDI ready ; CD-WO
Capacity
650 MB
Block Size
Mode 1
2,048 bytes, 1024 bytes
Mode 2
2,340 bytes, 2,336 bytes, 1024 bytes
CD-DA
2,352 bytes
CD-XA
2,328 bytes
Interface
IDE (ATAPI)
Access Times (typical)
Random
<100 ms
Full-Stroke
<150 ms
Audio Output Level
Line-Out
0.7 VRMS at 47 kOhms
Data Transfer Rate
Sustained
150 KB/s (single), 1,500 to 7,200
KBps
(10x to 48x)
Burst
150 KB/s to 7,200 KB/s
Cache Buffer
128 KB
Start-up Time (typical)
<7seconds
Stop Time
<4seconds
Laser Parameters
Type
Semiconductor Laser GaA1As
Wave Length
780 ± 25 nm
Operating Conditions
Temperature
41° to 113° F (5° to
45° C)
Humidity
10% to 80%
Dimensions
(HxWxD, maximum)
1.7 x 5.85 x 8.11 in (42.9 x 150
x 208 cm)
Weight
2.09 lb (0.95 kg)
NC7760 PCI Gigabit
Server Adapter (embedded)
Network Interface
10Base-T/100Base-TX/1000Base-TX
Compatibility
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Data Transfer Method
32-bit bus-master
PCI
Network Transfer
Rate
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex)
100 Mb/s
1000Base-TX (Half and Full-Duplex)
2000Mb/s
Connector
RJ-45
Cable Support
10Base-T
Categories 3, 4 or 5 UTP; up to
328 ft (100 m)
10/100/1000Base-TX
Category 5 UTP; up to 328 ft (100
m)
Integrated Single Channel Wide Ultra3 SCSI Adapter in PCI Slot 1
Drives Supported
Up to 14 SCSI devices Wide Ultra320,
Wide Ultra3 and Wide Ultra2 SCSI hard drives
Data Transfer Method
64-bit/33-MHz PCI bus-master
SCSI Channel Transfer Rate
160 MB/s per channel
Maximum Transfer Rate per PCI
Bus (peak)
267 MB/s per channel
SCSI Protocols
Wide Ultra 3 SCSI and Wide Ultra2
SCSI
Electrical Protocol
Low Voltage Differential (LVD)
SCSI Termination
Active Termination
External SCSI Connectors
External SCSI cabling from the integrated
SCSI controller is achieved using an internal to external SCSI cable option
kit (PN 159547-B22 or 333370-B21).
DL QuickSpecs
US QuickSpecs 
303284-B21
